PRODUCT DATA SHEET
Silicone 410
DESCRIPTION
Silicone 410 is a ready-to use, high solids, single component, solvent borne, moisturecure fluid applied silicone coating.
ADVANTAGES
- Superior Protection - forms a durable, weather resistant "rubber-like" seal.
- Excellent UV protection.
- Superior adhesive and cohesive strength.
BASIC USES
Silicone 410 provides elemental protection for architectural surfaces such as vertical walls, masonry, concrete, metal, single ply roof membranes and sprayed-in-place urethane foam systems.
INSTALLATION
| Mixing: |  |
Mix before application to assure uniform color and consistency.
|
|||
| Surface Prep: | All surfaces to be coated must be clean, dry, and paintable. It may be necessary to power wash and/or prime to enhance adhesion. See application specification for more details. | ||||
| Application: |
This product may be applied directly to any clean, dry surface. Polyurethane foam should be coated within 24 hours of application. Apply by spray, brush, or roller as received. No thinning or reducing is necessary. Subsequent coats should be applied within 24 hours of prior applications to insure full and uniform adhesion. It is not recommended that this product be applied at temperatures below 50°F. (10°C.), or if rain is expected within 1 hours of application. Silicone 410 may be applied at lower temperatures, however the cure time will be extended. |
||||
|
WARRANTY
American WeatherStar warrants that the material supplied will meet or exceed physical properties as published. The contractor guarantees that workmanship will be free of defects in coating application. Since performance of previously installed substrate is beyond the control of American WeatherStar or the contractor, requests for additional warranty coverage shall be subject to prior approval by American WeatherStar.
MAINTENANCE
Periodic maintenance of all American WeatherStar products, including cleaning, will ensure extended service life and maintain reflectivity.
.
TECHNICAL DATA
|
Color: |
White, Light Grey, and Dark Grey. Special colors upon request at additional charge. |
|
|
Viscosity: |
9,000 cps |
|
|
Tensile Strength: |
486 psi at 73°F + 20 |
ASTM D-412 |
|
Elongation (Initial): |
267% at 73°F + 20 |
ASTM D-412 |
|
Tensile, set at 100% Elongation: |
Nil. |
|
|
Reflectivity (White): |
84% |
C-1549 |
|
Emissivity (White): |
.85 |
C-1371 |
| SRI: |
105 |
|
|
Solids: |
Weight: 80% ± 2 |
ASTM D-1644 |
|
Flash Point: |
>105°F |
ASTM D-93 |
|
Durometer Hardness: |
50± 5 points |
Shore A |
|
Cure Time: |
2-8 hours, depending upon temperature. |
|
|
Drying Time: |
1 hour at 77°F |
|
|
Flammability: |
Class “A” Non-Combustible and Class “B” Combustible credentials as tested under UL 790 procedures over spray foam and single-ply roofing systems. |
|
|
VOC: |
<250 Grams/Liter |
ASTM-D-3960 |
|
Recommended Coverage: |
Depends on substrate: See application specifications for each surface. |
|
|
Shelf Life: |
6 months when stored between 35°F and 75°F. (Unopened Containers.) |
|
|
Weight: |
9.2 lbs. per gallon |
|
|
Clean Up: |
Mineral Spirits |
|
|
Temperature Stability Range: |
-80°F to 350°F (-37°C to 177°C) |
|
|
Packaging: |
5 gallon buckets, 55 gallon drums |
|
AWS Home | Coatings | Contractors | Facility Managers | Architects | Single-Ply | Spray Foam
ENERGY STAR® | Certifications | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Links | Site Map | Contact Us
All content Copyright © 2004-2009 American WeatherStar
