FABRIC BOND 930 Designed to be a bonding agent to secure polyester fabric to roof surfaces.
USES
Asphalt, concrete, wood, tile, metal and virtually any clean, dry, non-silicone surface.
FEATURES
- Seals asphaltic surfaces with little or no bleed through.
- Excellent adhesion to various surfaces.
- Easy to use, easy clean up, non-toxic and VOC compliant water based coating.
- Must be topcoated with either Acrylic 210 or any other WeatherStar Coatings top coats.
PREPARATION
All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Pressure washing is recommended for older coatings. Do not apply within two hours of sunset, rain, fog or freezing temperatures.
APPLICATION
Fabric Bond 930 is ready to use. Thinning is not required or recommended.
- Roof broom, squeegee.
- Brush: Good quality synthetic bristle brush.
- Roller: Long nap roller.
TECHNICAL DATA
| Color: | Blue |
| Viscosity: | 55 – 60 KU @ 25°C / 77°F |
| Density, lb./gal: | 8.38 lbs. / gallon. |
| PH: | > 6.0 ± .5% |
| Percent Solids by Weight: | 48% ± 2% |
| Flash Point: | Same as water. |
| Coverage: | 2-2.5 gallons per 100 sq.ft., depending on porosity of surface. |
| Recommended Coverage: | The number of coats depends on surface porosity; however, one coat is recommended when installing fabric liner |
| Min. Surface Application Temp.: | 55°F. Do not allow to freeze. |
| Drying Time: | Will depend on climate conditions. Allow at least 24 hours drying time between coats. First coat must be thoroughly dry before applying second coat. |
| Packaging: | 5 gallon buckets, 50 gallon drums. |
AWS Home | Coatings | Contractors | Facility Managers | Architects | Single-Ply
ENERGY STAR® | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Links | Site Map | Contact Us
All content Copyright © 2004-2008 American WeatherStar
