AWS: Roof Coatings Commercial Roofing Flat Roofing Repair Metal Roof Repair

DESCRIPTION

Rust Prime 912 is a high quality corrosion resistant acrylic primer. It was specifically developed to not only adhere to difficult metal substrates, but to also give good flash rust, and corrosion resistance over carbon steel. Rust Prime 912 achieves this through its ability to inhibit the oxidizing of the substrate.

Rust Prime 912 has excellent adhesion to galvanized steel and aluminum. It can be coated with water based and most solvent-based coatings with sufficient surface preparation.

FEATUTRES/BENEFITS

Rohm and Haas - 100% Acrylic Technology
Adhesion - Excellent adhesion to metal.
Corrosion Resistant - Resists flash, rust, and corrosion.
Easy Application - Single component, can be brushed, rolled or sprayed.
Quick Surface Dry - Material will be dry to touch in approximately 30 minutes,
and can be recoated in one hour.
Environmentally Friendly Water based; asbestos, lead, and mercury free.

TYPICAL PROPERTIES: (at 750 F)

Color	Red
Solids by Weight	50 + 2%
Solids by Volume	40 + 2%
Weight	10 lb./Gal.
Application Rate	1/2 gal per square

INSTALLATION

Rust Prime 912 can be airless sprayed, rolled or brushed. If necessary, water is used for reducing.Thinning should not exceed 10%. Application rate is typically 1/2 gallon per square but will vary depending on the surface being primed. Drying time depends on factors such as temperature, humidity, and primer thickness. The primer must be completely dry prior to foaming. Generally 2 to 3 hours on a hot sunny day will be adequate. Clean up is accomplished with water.

All surfaces must be clean, dry, and free of dirt, grease, oil, or contaminants to insure proper adhesion.

LIMITATIONS AND PRECAUTIONS

Do not apply when ambient temperature is below 50° F. Cold temperatures and high humidity will retard drying.
Store in tightly closed containers and protect from freezing.
Surface must be clean, dry, rust free, and free of loose dirt.
Material should be coated with a suitable topcoat.

Disclaimer: Our data is based on information from laboratory tests which are believed to be accurate but all recommendations are made without warranty, since the conditions of use are beyond the control of American WeatherStar. We do not assume any liability or responsibility of the product relative to coverage, performance, or injury resulting from its use. Liability, if any, is limited to replacement of product.