Acrylic Clear Primer 9000
Acrylic Clear Primer 9000 is designed to be a bonding primer for concrete block, masonry, and wood surfaces prior to applying the American Weatherstar wall coating.
FEATURES
- Excellent adhesion to various surfaces.
- Easy to use, easy clean up, non-toxic and VOC compliant water based coating.
- Must be topcoated with either Acrylic Coat 2000 or other WeatherStar Coatings top coats.
PREPARATION
All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Pressure washing is recommended for older coatings. Do not apply within two hours of sunset, rain, fog or freezing temperatures.
APPLICATION
Acrylic Clear Primer 9000 is ready to use. Thinning is not required or recommended.
- Spray: 2000 psi. .317 tip
- Brush: Good quality synthetic bristle brush.
- Roller: Long nap roller.
PHYSICAL PROPERTIES
| Color: | Clear |
| Viscosity: | 55 – 60 KU @ 25°C / 77°F |
| Density, lb./gal: | 8.38 lbs. / gallon. |
| pH: | > 6.0 ± .5% |
| Percent Solids by Weight: | 31% ± 2% |
| Flash Point: | Same as water. |
| Coverage: | Approximately 200 sq ft per gallon depending on texture of substrate. |
| Recommended Coverage: | One coat |
| Min. Surface Application Temp.: | 55°F. Do not allow to freeze. |
| Drying Time: | Will depend on climate conditions. Allow at least 24 hours drying time between coats. |
| Packaging: | 5 gallon buckets, 55 gallon drums. |
AWS Home | Coatings | Contractors | Facility Managers | Architects | Single-Ply
ENERGY STAR® | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Links | Site Map | Contact Us
All content Copyright © 2004-2008 American WeatherStar
