AWS: Roof Coatings Commercial Roofing Flat Roofing Repair Metal Roof Repair

DESCRIPTION

Acrylic Clear Gloss elastomeric coating is to be used as a skylight sealer or to topcoat ACRYLIC 210 elastomeric coating and other WeatherStar Coatings’ products.

USES

High gloss finish coat to help keep our topcoat systems clean longer. Can also be used on masonry, concrete, fiberglass skylights, and other mechanically sound surfaces where a high gloss is desired.

FEATURES

Extremely tough, durable, UV resistant protective sealant.
Excellent water resistance.
Good bridging qualities over hairline cracks and small openings.
Excellent adhesion and binding qualities.
Outstanding resistance to dirt collection and pollutants.
Keeps surface clean thereby reducing maintenance costs.
Brings out and heightens the natural color of stone and brick.
Environmentally safe.

PREPARATION

All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Pressure washing is recommended for older coatings. Do not apply within two hours of sunset, rain, fog or freezing temperatures.

APPLICATION

Acrylic Clear Gloss 230 is ready to use. Thinning is not required or recommended.

Spray: Airless Sprayer, 1/2 g.p.m. capacity with a #517 tip.
Brush: Good quality synthetic bristle brush.
Roller: Long nap roller.

TECHNICAL DATA

Color:	White, dries clear
Viscosity:	95 KU @ 25°C / 77°F
Density, lb./gal:	8.55 lbs. / gallon.
PH:	> 8.5 ± .5%
Percent Solids by Weight:	39% ± 2%
Flash Point:	Same as water.
Hardness, Shore A:	60 – 80 (ASTM D-2240)
Coverage:	250 sq.ft. per gallon, depending on porosity of surface.
Recommended Coverage:	The number of coats depends on surface porosity; however, one coat is recommended.
Min. Surface Application Temp.:	45°F. Do not allow to freeze.
Drying Time:	Will depend on climate conditions. Allow at least 2 hours drying time between coats. First coat must be thoroughly dry before applying second coat.
Packaging:	5 gallon buckets, 50 gallon drums.