High Tensile Acrylic 214 series acrylics are water-borne, single component coatings that have excellent hardness, strength, adhesion and water resistance.
USAGE
A protective coating and membrane for mechanical room floors, non-ponding walking decks, metal roofs with positive drainage and applications where odor and fumes of solvent based coatings are not desirable or could be hazardous.
STORAGE
Two years. Protect from freezing. Freezing temperature 32°F (0°C). If frozen, thaw at 70°F to 80°F (21°C to 27°C). If melted to a smooth, homogeneous condition, it is equal to original material. Do not allow material or surface of container to exceed 100°F (38°C). Gelling may occur.
THINNING
Thinning is not recommended under normal conditions. When necessary, A-38 Series coatings may be thinned up to 10% with water, with subsequent reduction in film build and vertical hold.
APPLICATION
| • |  |
Apply by spray, roller or brush. A wide range of spray equipment can be used including airless spray or conventional air atomizing spray. |
| • | Clean up with water mixed with liquid detergent. |
|
| • | High Tensile Acrylic 214 products are water based systems and require the complete evaporation of water to achieve cure. DO NOT apply to surfaces that are, or will be lower than, 50°F (10°C) within 12 hours. |
TECHNICAL DATA
| Standard Colors: | Oyster, Pewter, Shale, Adobe |
| Metal Roof Colors: | Classic White, Old Town Gray, Weathered Copper, Evergreen, Colonial Red, Tahoe Blue |
APPLIED PRODUCT DATA
| Weatherability: | Excellent color stability, gloss retention and chalk resistance. | |
| Tensile: | ASTM D-412 Strength: Elongation: Permanent Set at Break: |
2500 psi min. 300% min. 15% max. |
| Hardness: | ASTM D-2240 90 | Shore A |
| Tear Resistance: | ASTM D-624 DIE C (Lb./In.) | 300 min. (53.6 min. kg(f)/cm) |
| Water Vapor Permeability: | ASTM E-96 Method B, 100% R.H. Difference |
0.06 Perm Inches |
| Toxicity: | We believe cured coating to be non-toxic. However, confirming tests have not been conducted. |
|
| Reflectivity: | White ASTM C 1549 | 89.3% |
| Adhesion: | Adheres well to most surfaces. | |
PACKAGED PRODUCT DATA
| Coverage: | Depends on substrate. | |
| Solids: | Weight: Method 4041 / Fed. Std. 141 Volume: |
49.4% 40.8% |
| V.O.C.: | 45 grams per liter. Meets SCAQMD V.O.C. requirements. | |
| Flash Point: | Above 200°F (93°C). Tag Open Cup | |
AWS Home | Coatings | Contractors | Facility Managers | Architects | Single-Ply
ENERGY STAR® | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Links | Site Map | Contact Us
All content Copyright © 2004-2008 American WeatherStar
