Acrylic 210 is a 100% acrylic elastomeric coating for all types of roofs including metal, modified bitumen, single ply, and polyurethane foam. It contains rust inhibitors, and algaecides which makes it ideal for application over most types of roofs.
BENEFITS
- Reduces daily expansion and contraction (thermal cycling) of metal roofing.
- Contains strong rust inhibitive pigments.
- Reflects 90% of the heat and harmful UV rays of the sun.
- Excellent reflective properties which helps to reduce cooling costs. Prevents premature degradation.
- Contains a strong mildewcide / fungicide.
- Excellent adhesion to various substrates.
- Superior resistance to dirt pick-up, helps stay white longer and maintains reflectivity.
- Easy to use, easy clean up, non-toxic and VOC compliant water based coating.
All surfaces to be coated must be cleaned properly. Power washing is recommended. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
Acrylic 210 is ready to use. Thinning is not required or recommended.
- Spray: Airless sprayer. 3000 p.s.i., 2 g.p.m. capacity with a #027-#031 tip.
- Brush: Good quality synthetic bristle brush.
- Roller: Long nap roller.
- V.O.C. <100 g./lit.
TECHNICAL DATA
| Color: | White; standard and custom colors available. |
| Viscosity: | 115 – 120 KU @ 25°C / 77°F |
| Density, lb./gal: | 11.78 ± .1 |
| PH: | > 8 |
| Percent solids by Volume: | 60%+/- 1% |
| Percent Solids by Weight: | 63% ± 1% |
| Flash Point: | Same as water. |
| Hardness, Shore A: | 60 – 80 (ASTM D-2240) |
| Tensile Strength at Max Stress: | 200 p.s.i. @ 25°C / 77°F 500 p.s.i. @ -17°C / 0°F (ASTM D-412) |
| % Elongation at Break: | 500% @ 25°C / 77°F 300% @ -17°C / 0°F (ASTM D-412) |
| Permeability: | 5 perms/inch. 20 mils thick coating (ASTM E-389) |
| Coverage: | 2 gallons per 100 sq.ft. yields 20 dry mils 3 gallons per 100 sq.ft. yields 30 dry mils 4 gallons per 100 sq.ft. yields 40 dry mils |
| Recommended Coverage: | Two to four gallons per 100 sq ft depending on surface |
| Min. Surface Application Temp.: | 45°F. Do not allow to freeze. |
| Drying Time: | 3 hours @ 77°F, 50% relative humidity; to sustain foot traffic. |
| Packaging: | 5 gallon buckets, 50 gallon drums. |
| Energy Star Solar Reflectance: | Initial Solar Reflectance = .81 Solar Reflectance After 3 years = .64 Emissivity = .90 |
AWS Home | Coatings | Contractors | Facility Managers | Architects | Single-Ply
ENERGY STAR® | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Links | Site Map | Contact Us
All content Copyright © 2004-2008 American WeatherStar
